The Pre-Post Study results of the Geislinger Compowind® Coupling
Used on one of the most renowned offshore wind turbines, the Geislinger Compowind® coupling gives OEMs a competitive lead in the race for robust and reliable drive-trains. The Pre-Post Study results of the new Geislinger wind power coupling are of great interest for developers, decision-makers, and technicians in the wind industry.
Geislinger teamed up with the Centre for Wind Power Drives (CWD), a department of the RWTH Aachen University, to run pre-post simulations with one of their generic multi-body simulation models. A state-of-the-art 6MW offshore turbine, allowing simulations in 6DOF (degrees of freedom), with four-point suspension (locating and floating bearing), and a three-stepped gearbox with elastic mounts and hydraulic torque support was used as a reference model. Taking into consideration its stiffness and damping values, a Compowind® CW 240 was designed and integrated into the coupling model, while the gearbox was modelled rigidly to the main frame.
Picture 1: Multi-body simulations model with the integrated Geislinger Compowind® Coupling. Picture 2: Geislinger Compowind® Coupling
Dynamic simulation, bearing in mind the design load, turbulence and special events, together with statistical examinations (LDD, Rainflow-counting) delivered plenty of valuable results. Comparisons to the reference model allow exact determination of the coupling’s contribution to reduce load and fatigue. Pictured below a comparison of the pitch moment (My) on the gearbox input shaft:
Picture 3: Comparison of the pitch moment (My) on the gearbox input shaft
The load analysis at steady-state operation (top left) distinctly illustrates the reduction of moments transmitted over the y-axis in the coupling model. This is a result of the gearbox mounted rigidly to the main frame. In addition, significantly higher dynamic load caused by excitations of drivetrain bending eigenmodes can be noticed in the reference model (bottom left).
The LDD analysis (top center) shows a wide load spectrum of the reference model (excitations of drivetrain bending eigenmodes); whereas there is only one load bin in the coupling model (the moment oscillates around a central position with very low amplitudes).
Rainflow-counting (images right side) mirrors the LDD results. The central position in the coupling model around zero and the low oscillating amplitudes reflect the vast reduction of moment over the y-axis transmitted to the gearbox.
Even in the event of a grid failure (bottom center), the coupling model ensures - thanks to its damping characteristic - clearly reduced dynamics.
The pre-post study clearly demonstrates that non-torque loads are reduced significantly by decoupling the drivetrain from the rotor with the Compowind® coupling. Even under normal operating conditions, the load on the input shaft of the gearbox reduces by an order of magnitude and even more. Excitation of drivetrain eigenmodes and the transmission of system eigenfrequencies into the gearbox are virtually eliminated and improve the dynamic behavior. The load consideration after the occurrence of special events like extreme gusts or grid failures show that the Compowind® ensures incomparable lower post-pulse oscillation. The results conclusively show that the Compowind® coupling on the low-speed side of a wind turbine makes a significant reduction to loads on the gearbox. The dynamic behavior of the whole system improves noticeably, and so does the reliability of the drivetrain.
Geislinger offers a perfect combination of lightweight and low maintenance solutions with our high performance lineup of the enhanced Gesilco® composite Couplings and the newest steel spring SAE Couplings. These Couplings provide excellent torsional features that are easily combined to a wide variety of interfaces.
In addition, other Geislinger products like the robust Gesilco® composite shaftline or Silenco® acoustic damping Coupling are excellent driveline system additions.